Datasheet4U Logo Datasheet4U.com

LM5035A - PWM Controller

General Description

The LM5035A Half-Bridge Controller/Gate Driver contains all of the

Key Features

  • necessary to implement half-bridge topology power converters using voltage mode control with line voltage feed-forward. The LM5035A is a functional variant of the LM5035 half-bridge PWM controller. The VCC current limit threshold has been increased to 35 mA. The soft start and soft start currents have been increased from 50 µA to 100 µA. The BST UV threshold has been lowered to less than the VCC UV threshold. The ratio of the T1 and T2 delays on the SR1 and SR2 outputs has been increased from 2:.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM5035A PWM Controller Texas Instruments
LM5035 PWM Controller Texas Instruments
LM5035B PWM Controller Texas Instruments
LM5035C PWM Controller Texas Instruments
LM5030 100-V Push-Pull Current Mode PWM Controller Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM5035A-1 PWM Controller
LM5035 PWM Controller with Integrated Half-Bridge and SyncFET Drivers
LM5035B PWM Controller
LM5030 100V Push-Pull Current Mode PWM Controller
LM5032 High Voltage Dual Interleaved Current Mode Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM5035A/LM5035A-1 PWM Controller with Integrated Half-Bridge and SyncFET Drivers July 30, 2010 LM5035A/LM5035A-1 PWM Controller with Integrated Half-Bridge and SyncFET Drivers General Description The LM5035A Half-Bridge Controller/Gate Driver contains all of the features necessary to implement half-bridge topology power converters using voltage mode control with line voltage feed-forward. The LM5035A is a functional variant of the LM5035 half-bridge PWM controller. The VCC current limit threshold has been increased to 35 mA. The soft start and soft start currents have been increased from 50 µA to 100 µA. The BST UV threshold has been lowered to less than the VCC UV threshold. The ratio of the T1 and T2 delays on the SR1 and SR2 outputs has been increased from 2:1 to 3:1.