LM5037 Datasheet | National Semiconductor

LM5037 Dual-Mode PWM Controller With Alternating Outputs .. December 12, 2008 LM5037 Dual-Mode PWM Controller With Alternating Outputs General Description The LM5037 PWM controller contains all the Features necessary to implement balanced double-ended power converter topologies, such as push-pull, half-bridge and full-bridge. These double-ended topologies allow for higher efficiencies and greater power densities pared to mon singleended topologies such as the flyback and forward. The LM5037 can be configured for either voltage mode or current mode control with minimum external ponents. Two alternating gate drive outputs are provided, each capable of 1.2A peak output current. The LM5037 can be configured to operate directly from the input voltage rail over a wide range of 13V to 100V. Additional Features include programmable maximum duty cycle limit, line under-voltage lockout, cycle-bycycle current limit and a hiccup mode fault protection with adjustable timeout delay, soft-start and a 2 MHz capable oscillator with synchronization capability, precision reference and thermal shutdown. Features - - - - - - - - - - - - - High voltage (100V) start-up regulator Alternating outputs for double-ended topologies Current-mode or feed-forward voltage-mode control Programmable maximum duty cycle l Limit 2% feedback reference accuracy High gain-bandwidth error amplifier Programmable line under-voltage lockout (UVLO) with adjustable hysteresis Versatile dual mode over-current protection with hiccup delay timer Programmable soft-start Precision 5V reference output Current sense leading edge blanking Resistor programmed 2 MHz capable oscillator Oscillator synchronization capability with low frequency lockout protection Package - TSSOP-16 Simplified Push-Pull Power Converter © 2008 National Semiconductor Corporation .national. Connection Diagram .. Top View 16-Lead TSSOP Package Ordering...