Datasheet4U Logo Datasheet4U.com

LM567 - Tone Decoder

Datasheet Summary

Description

The LM567 and LM567C are general purpose tone decoders designed to provide a saturated transistor switch to ground when an input signal is present within the passband.

Features

  • n 20 to 1 frequency range with an external resistor n Logic compatible output with 100 mA current sinking capability n Bandwidth adjustable from 0 to 14% Connection Diagrams Metal Can Package Dual-In-Line and Small Outline Packages DS006975-1 Top View Order Number LM567H or LM567CH See NS Package Number H08C DS006975-2 Top View Order Number LM567CM See NS Package Number M08A Order Number LM567CN See NS Package Number N08E © 1999 National Semiconductor Corporation DS006975 www. national. co.

📥 Download Datasheet

Datasheet preview – LM567

📁 Similar Datasheet

  • LM567 - Tone Decoder (Texas Instruments)
  • LM567 - Tone Decoder (HGSemi)
  • LM567C - Tone Decoder (Texas Instruments)
  • LM567C - Tone Decoder (HGSemi)
  • LM567M - Tone Decoder (HGSemi)
  • LM567N - Tone Decoder (HGSemi)
  • LM56 - Dual Output Low Power Thermostat (Texas Instruments)
  • LM561C - Middle Power LED (Samsung)
  • LM5623-11 - THREE DIGIT DISPLAY (Ledtech)
  • LM5623-11EWRN - THREE DIGIT DISPLAY (Ledtech)
Other Datasheets by National Semiconductor
  • LM567C - Tone Decoder
  • LM56 - Dual Output Low Power Thermostat
  • LM5642 - High Voltage/ Dual Synchronous Buck Converter
  • LM565 - Phase Locked Loop
  • LM566C - LM566C Voltage Controlled Oscillator
  • LM50 - SOT-23 Single-Supply Centigrade Temperature Sensor
  • LM5000 - Regulator
  • LM5000EP - Regulator

Full PDF Text Transcription

Click to expand full text
LM567/LM567C Tone Decoder May 1999 LM567/LM567C Tone Decoder General Description The LM567 and LM567C are general purpose tone decoders designed to provide a saturated transistor switch to ground when an input signal is present within the passband. The circuit consists of an I and Q detector driven by a voltage controlled oscillator which determines the center frequency of the decoder. External components are used to independently set center frequency, bandwidth and output delay. n n n n High rejection of out of band signals and noise Immunity to false signals Highly stable center frequency Center frequency adjustable from 0.
Published: |