LM6152 Datasheet | National Semiconductor

LM6152/LM6154Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers May 1999 LM6152/LM6154 Dual and Quad High Speed/Low Power 75 MHz GBW Rail-to-Rail I/O Operational Amplifiers General Description Using patented circuit topologies, the LM6152/54 provides new levels of speed vs. power performance in applications where low voltage supplies or power limitations previously made promise necessary. With only 1.4 m A/amplifier supply current, the 75 MHz gain bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The slew rate of the devices increases with increasing input differential voltage, thus allowing the device to handle capacitive loads while maintaining large signal amplitude. The LM6152/54 can be driven by voltages that exceed both power supply rails, thus eliminating concerns about exceeding the mon-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. Operating on supplies from 2.7V to over 24V, the LM6152/54 is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation. Features At VS = 5V, Typ unless noted n Greater than Rail-to-Rail Input CMVR - 0.25V to 5.25V n Rail-to-Rail Output Swing 0.01V to 4.99V n Wide Gain-Bandwidth: 75 MHz @ 100 k Hz n Slew Rate: Small signal 5V/µs Large signal 45V/µs n Low supply current 1.4m A/amplifier n Wide supply range 2.7V to 24V n Fast settling time of 1.1µs for 2V step (to 0.01%) n PSRR 91 d B n CMRR 84 d B Applications n Portable high speed instrumentation n Signal conditioning amplifier/ADC buffers n Barcode scanners Connection Diagrams 8-Pin DIP/SO 14-Pin DIP/SO DS012350-3 Top View DS012350-4 Top View © 1999 National Semiconductor Corporation DS012350 .national. Ordering Information Packaged...