Datasheet4U Logo Datasheet4U.com

LM6511 - 180 ns 3V Comparator

General Description

The LM6511 voltage comparator is ideal for analog-digital interface circuitry when only a +3V or +3.3V supply is available.

The open-collector output permits signal compatibility with a wide variety of digital families: +5V CMOS, +3V CMOS, TTL and so on.

Key Features

  • that are available in traditional sub-microsecond comparators: output sync strobe, inputs and output may be isolated from system ground, and wire-ORing. Also, the LM6511 uses the industry-standard, single comparator pinout configuration. Features (Typical unless otherwise noted) n Operates at +2.7V, +3V, +3.3V, +5V n Low Power consumption < 9.45 mW @ V+ = 2.7V (max) n Fast Response Time of 180 ns.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM6511 3V Comparator Texas Instruments
LM6584 13V RRIO High Output Current Operational Amplifier Texas Instruments
LM6588 16V RRIO High Output Current Operational Amplifier Texas Instruments
LM60 SOT-23 or TO-92 Temperature Sensor Texas Instruments
LM60-Q1 SOT-23 Temperature Sensor Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM6588 TFT-LCD Quad/ 16V RRIO High Output Current Operational Amplifier
LM60 2.7V/ SOT-23 or TO-92 Temperature Sensor
LM604 4-Channel Mux-Amp
LM6041 CMOS Single Micropower Operational Amplifier
LM604A 4-Channel Mux-Amp

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM6511 180 ns 3V Comparator June 1999 LM6511 180 ns 3V Comparator General Description The LM6511 voltage comparator is ideal for analog-digital interface circuitry when only a +3V or +3.3V supply is available. The open-collector output permits signal compatibility with a wide variety of digital families: +5V CMOS, +3V CMOS, TTL and so on. Supply voltage may range from 2.7V to 36V between supply voltage leads. The LM6511 operates with little power consumption (Pdiss < 9.45 mW at V+ = +2.7V and V− = 0V). This voltage comparator offers many features that are available in traditional sub-microsecond comparators: output sync strobe, inputs and output may be isolated from system ground, and wire-ORing. Also, the LM6511 uses the industry-standard, single comparator pinout configuration.