Datasheet4U Logo Datasheet4U.com

LM66 - Dual Output Internally Preset Thermostat

Description

The LM66 is a precision low power thermostat.

Two stable temperature trip points (VT1 and VT2) are generated by dividing down the LM66 1.250V bandgap voltage reference using a resistors divider network.

The LM66 has two digital outputs.

Features

  • n n n n n Digital outputs support TTL logic levels Internal temperature sensor 2 internal comparators with hysteresis Internal voltage reference Currently available in 8-pin SO plastic package Key Specifications n Power Supply Voltage n Power Supply Current n VREF n Hysteresis Temperature n Internal Temperature Sensor Output Voltage (+6.20 mV/˚C x T) +400 mV ± 3˚C (max) n Temperature Trip Point Accuracy n T1 set point +73˚C n T2 set point +82˚C 2.7V to 10V 250 µA (max) 1.250V ± 1.4% (max) 5˚C.

📥 Download Datasheet

Datasheet preview – LM66

📁 Similar Datasheet

  • LM66 - Dual Output Internally Preset Thermostat (Texas Instruments)
  • LM66100 - Low IQ Ideal Diode (Texas Instruments)
  • LM66100-Q1 - Low IQ Ideal Diode (Texas Instruments)
  • LM60 - SOT-23 or TO-92 Temperature Sensor (Texas Instruments)
  • LM60-Q1 - SOT-23 Temperature Sensor (Texas Instruments)
  • LM6020ACA - LCD (TOPWAY)
  • LM6020ACW - LCD (TOPWAY)
  • LM6020BCW - LCD (TOPWAY)
  • LM6020BCW-1 - LCD (TOPWAY)
  • LM6020BGW - LCD (TOPWAY)
Other Datasheets by National Semiconductor
  • LM60 - 2.7V/ SOT-23 or TO-92 Temperature Sensor
  • LM604 - 4-Channel Mux-Amp
  • LM6041 - CMOS Single Micropower Operational Amplifier
  • LM604A - 4-Channel Mux-Amp
  • LM607 - Precision Operational Amplifier
  • LM61 - 2.7V/ SOT-23 or TO-92 Temperature Sensor
  • LM6104 - Quad Gray Scale Current Feedback Amplifier
  • LM611 - Operational Amplifier and Adjustable Reference

Full PDF Text Transcription

Click to expand full text
LM66 Dual Output Internally Preset Thermostat April 2000 LM66 Dual Output Internally Preset Thermostat General Description The LM66 is a precision low power thermostat. Two stable temperature trip points (VT1 and VT2) are generated by dividing down the LM66 1.250V bandgap voltage reference using a resistors divider network. The LM66 has two digital outputs. OUT1 goes LOW when the temperature exceeds T1 and goes HIGH when the the temperature goes below (T1–THYST). Similarly, OUT2 goes LOW when the temperature exceeds T2 and goes HIGH when the temperature goes below (T2–THYST). THYST is an internally set 5˚C typical hysteresis. The LM66 is currently available in an 8-lead small outline package.
Published: |