Datasheet4U Logo Datasheet4U.com

LM810 - 3-Pin Microprocessor Reset Circuits

General Description

The LM809/810 microprocessor supervisory circuits can be used to monitor the power supplies in microprocessor and digital systems.

They provide a reset to the microprocessor during power-up, power-down and brown-out conditions.

Key Features

  • Precise monitoring of 3V, 3.3V, and 5V supply voltages Superior upgrade to MAX809/810 Fully specified over temperature 140ms min. Power-On Reset pulse width, 240ms typical Active-low RESET Output (LM809) Active-high RESET Output (LM810) n Guaranteed RESET Output valid for VCC≥1V n Low Supply Current, 15µA typ. n Power supply transient immunity n n n n.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM810 3-Pin Microprocessor Reset Circuits Texas Instruments
LM81 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor Texas Instruments
LM80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor Texas Instruments
LM8002 3W Audio Power Amplifier HONGLIFA ELECTRONICS
LM8002 Audio amplifier Crystal Electronic

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM81 Serial Interface ACPI-Compatible Microprocessor System
LM80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor
LM809 3-Pin Microprocessor Reset Circuits
LM82 Remote Diode and Local Digital Temperature Sensor
LM8207 TFT 18 Gamma Buffer VCOM Driver Voltage Reference

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM809/LM810 3-Pin Microprocessor Reset Circuits September 1999 LM809/LM810 3-Pin Microprocessor Reset Circuits General Description The LM809/810 microprocessor supervisory circuits can be used to monitor the power supplies in microprocessor and digital systems. They provide a reset to the microprocessor during power-up, power-down and brown-out conditions. The function of the LM809/810 is to monitor the VCC supply voltage, and assert a reset signal whenever this voltage declines below the factory-programmed reset threshold. The reset signal remains asserted for 240ms after VCC rises above the threshold. The LM809 has an active-low RESET output, while the LM810 has an active-high RESET output. Six standard reset voltage options are available, suitable for monitoring 5V, 3.