Datasheet4U Logo Datasheet4U.com

LM8261 - Op Amp

General Description

The LM8261 is a Rail-to-Rail input and output Op Amp which can operate with a wide supply voltage range.

Key Features

  • (VS = 5V, TA = 25˚C, Typical values unless specified). n GBWP 21MHz n Wide supply voltage range 2.5V to 30V n Slew rate 12V/µs n Supply current 0.97 mA n Cap load limit Unlimited n Output short circuit current +53mA/.
  • 75mA n +/.
  • 5% Settling time 400ns (500pF, 100mVPP step) n Input common mode voltage 0.3V beyond rails n Input voltage noise 15nV/ n Input current noise 1pA/ < 0.05% n THD+N.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM8261 Single RRIO High Output Current & Unlimited Cap Load Op Amp Texas Instruments
LM8262 High Output Current and Unlimited Cap Load Op Amp Texas Instruments
LM82 Remote Diode and Local Digital Temperature Sensor Texas Instruments
LM8207 TFT 18 Gamma Buffer + Driver + Voltage Reference Texas Instruments
LM8272 High Output Current & Unlimited Cap Load Op Amp Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM8262 Op Amp
LM82 Remote Diode and Local Digital Temperature Sensor
LM8207 TFT 18 Gamma Buffer VCOM Driver Voltage Reference
LM8272 Op Amp
LM828 Switched Capacitor Voltage Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM8261 Single RRIO, High Output Current & Unlimited Cap Load Op Amp in SOT23-5 April 2000 LM8261 Single RRIO, High Output Current & Unlimited Cap Load Op Amp in SOT23-5 General Description The LM8261 is a Rail-to-Rail input and output Op Amp which can operate with a wide supply voltage range. This device has high output current drive, greater than Rail-to-Rail input common mode voltage range, unlimited capacitive load drive capability, and provides tested and guaranteed high speed and slew rate while requiring only 0.97mA supply current. It is specifically designed to handle the requirements of flat panel TFT panel VCOM driver applications as well as being suitable for other low power, and medium speed applications which require ease of use and enhanced performance over existing devices.