Datasheet4U Logo Datasheet4U.com

LM8300 - Four Wire Resistive Touchscreen Controller

Download the LM8300 datasheet PDF. This datasheet also covers the LM8 variant, as both devices belong to the same four wire resistive touchscreen controller family and are provided as variant models within a single manufacturer datasheet.

General Description

The LM8300/8400/8500 is a 4-wire resistive touch screen controller.

The controller samples and drives the touch screen without the need of any external hardware.

The built in 10-bit A/D provides a maximum of 500 coordinate pairs per second (cpps).

Key Features

  • KEY.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LM8-400.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
LM8300 Four Wire Resistive Touchscreen Controller Texas Instruments
LM8322 Mobile I/O Companion Supporting Key-Scan National Semiconductor Corporation
LM8323 key-scan controller Texas Instruments
LM8325-1 GenI/O - Expander and Keypad Controller Texas Instruments
LM8327 GenI/O - Expander and Keypad Controller Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LM8305 STN LCD Display Bias Voltage Source
LM83 Triple-Diode Input and Local Digital Temperature Sensor
LM831 LM831 Low Voltage Audio Power Amplifier
LM832 LM832 Dynamic Noise Reduction System DNR
LM833 Dual Audio Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM8300/LM8400/LM8500 Four Wire Resistive Touchscreen Controller with Brownout PRELIMINARY October 2002 LM8300/LM8400/LM8500 Four Wire Resistive Touchscreen Controller with Brownout General Description The LM8300/8400/8500 is a 4-wire resistive touch screen controller. The controller samples and drives the touch screen without the need of any external hardware. The built in 10-bit A/D provides a maximum of 500 coordinate pairs per second (cpps). The data sampled from the touch screen is sent out on the UART at a speed of 38400 bps. The controller has a power-saving mode which causes the controller to self-power down when no touch is detected on the touch screen for a specified amount of time.