Datasheet4U Logo Datasheet4U.com

LMP8100 - Programmable Gain Amplifier

General Description

AT ANY TIME WITHOUT NOTICE.

NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.

TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL’S PRODUCT WARRANTY.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMP8100 Programmable Gain Amplifie Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LMP8270 High Common Mode / Gain of 20 / Precision Voltage Difference Amplifiers
LMP8271 High Common Mode / Gain of 20 / Bidirectional Precision Voltage Difference Amplifiers
LMP8272 (LMP8272 / LMP8277) Precision Voltage Difference Amplifiers
LMP8275 High Common Mode / Gain of 20 / Precision Voltage Difference Amplifiers
LMP8276 High Common Mode / Gain of 20 / Bidirectional Precision Voltage Difference Amplifiers
LMP8277 (LMP8272 / LMP8277) Precision Voltage Difference Amplifiers
LMP8601 Bidirectional Precision Current Sensing Amplifier
LMP8601Q Bidirectional Precision Current Sensing Amplifier
LMP8602 Bidirectional Precision Current Sensing Amplifier
LMP8603 Bidirectional Precision Current Sensing Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 551013037 - LMP8100 Evaluation Board User Guide 551013037 - LMP8100 Evaluation Board User Guide This evaluation board contains the LMP8100, along with a logic circuit to program the register in the LMP8100. National Semiconductor Application Note 1626 Mike Stout July 2007 Hardware Setup REGISTER PROGRAMMING SETUP 1. To use the on-board logic circuit to program the LMP8100 Register connect the jumpers as follows: JP1 – Pins 2 and 3 JP2 – Pins 2 and 3 JP3 – Pins 2 and 3 2. To use an external microcontroller to program the LMP8100 Register connect the jumpers as follows: JP1 – Pins 1 and 2 JP2 – Pins 1 and 2 JP3 – Pins 1 and 2 Connect the external microcontroller to J3. POWER SUPPLY SETUP 1.