LMP91000 Datasheet | National Semiconductor

.Data Sheet.co.kr LMP91000 Sensor AFE System: Configurable AFE Potentiostat for Low-Power Chemical Sensing Applications September 12, 2011 LMP91000 Sensor AFE System: Configurable AFE Potentiostat for Low-Power Chemical Sensing Applications General Description The LMP91000 is a programmable Analog Front End (AFE) for use in micro-power electrochemical sensing applications. It provides a plete signal path solution between a sensor and a microcontroller that generates an output voltage proportional to the cell current. The LMP91000’s programmability enables it to support multiple electrochemical sensors such as 3-lead toxic gas sensors and 2-lead galvanic cell sensors with a single design as opposed to the multiple discrete solutions. The LMP91000 supports gas sensitivities over a range of 0.5 n A/ppm to 9500 n A/ppm. It also allows for an easy conversion of current ranges from 5µA to 750µA full scale. The LMP91000’s adjustable cell bias and transimpedance amplifier (TIA) gain are programmable through the the I2C interface. The I2C interface can also be used for sensor diagnostics. An integrated temperature sensor can be read by the user through the VOUT pin and used to provide additional signal correction in the µC or monitored to verify temperature conditions at the sensor. The LMP91000 is optimized for micro-power applications and operates over a voltage range of 2.7V to 5.25V. The total current consumption can be less than 10μA. Further power savings are possible by switching off the TIA amplifier and shorting the reference electrode to the working electrode with an internal switch. Features Typical Values, TA = 25°C 2.7 V to 5.25 V - Supply voltage <10 µA - Supply current (average over time) 10 m A - Cell conditioning current up to 900p A (max) - Reference electrode bias current (85°C) 750µA - Output drive current - plete potentiostat circuit to interface to most chemical cells - Programmable cell bias voltage - Low bias voltage drift 2.75kΩ to 350kΩ -...