Datasheet4U Logo Datasheet4U.com

LMV116 - Low Voltage / 45MHz / Rail-to-Rail Output Operational Amplifiers with Shutdown Option

Datasheet Summary

Description

The LMV116 (single) rail-to-rail output voltage feedback amplifiers offer high speed (45MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMV118).

Features

  • (VS = 2.7V, TA = 25˚C, RL = 1kΩ to V+/2, AV = +1. Typical values unless specified). n.
  • 3dB BW 45MHz n Supply voltage range 2.7V to 12V n Slew rate 40V/µs n Supply current 600µA n Power down supply current 15µA n Output short circuit current 32mA ± 20mA n Linear output current n Input common mode voltage.
  • 0.3V to 1.7V n Output voltage swing 20mV from rails n Input voltage noise 40nV/ n Input current noise 0.75pA/.

📥 Download Datasheet

Datasheet preview – LMV116

Datasheet Details

Part number LMV116
Manufacturer National Semiconductor
File Size 416.39 KB
Description Low Voltage / 45MHz / Rail-to-Rail Output Operational Amplifiers with Shutdown Option
Datasheet download datasheet LMV116 Datasheet
Additional preview pages of the LMV116 datasheet.

📁 Similar Datasheet

  • LMV116 - LMV116/LMV118 Low Voltage 45MHz Rail-to-Rail Output Op Amp w/Shutdown Option (Rev. B) (ETCTI)
  • LMV112 - LMV112 40 MHz Dual Clock Buffer (Rev. B) (ETCTI)
  • LMV115 - GSM Baseband 30MHz 2.8V Oscillator Buffer (Texas Instruments)
  • LMV118 - LMV116/LMV118 Low Voltage 45MHz Rail-to-Rail Output Op Amp w/Shutdown Option (Rev. B) (ETCTI)
  • LMV1012 - LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) (ETCTI)
  • LMV1015 - LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) (ETCTI)
  • LMV1024 - PDM Output with Pre-Amplifier (Texas Instruments)
  • LMV1026 - PDM Output with Pre-Amplifier (Texas Instruments)
  • LMV1031 - LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) (ETCTI)
  • LMV1032 - LMV1032-06/LMV1032-15/LMV1032-25 Amps for 3-Wire Analog Electret Microphones (Rev. G) (ETCTI)
Other Datasheets by National Semiconductor
  • LMV110 - Fixed-Gain Amplifiers
  • LMV111 - Operational Amplifier with Bias Network
  • LMV115 - GSM Baseband 30MHz 2.8V Oscillator Buffer
  • LMV118 - Low Voltage / 45MHz / Rail-to-Rail Output Operational Amplifiers with Shutdown Option
  • LMV101 - Fixed-Gain Amplifiers
  • LMV1012 - Pre-Amplified ICs for High Gain 2-Wire Microphones
  • LMV1015 - Built-in Gain IC
  • LMV102 - Fixed-Gain Amplifiers

Full PDF Text Transcription

Click to expand full text
LMV116/LMV118 Low Voltage, 45MHz, Rail-to-Rail Output Operational Amplifiers with Shutdown Option October 2003 LMV116/LMV118 Low Voltage, 45MHz, Rail-to-Rail Output Operational Amplifiers with Shutdown Option General Description The LMV116 (single) rail-to-rail output voltage feedback amplifiers offer high speed (45MHz), and low voltage operation (2.7V) in addition to micro-power shutdown capability (LMV118). Output voltage range extends to within 20mV of either supply rail, allowing wide dynamic range especially in low voltage applications. Even with low supply current of 600µA, output current capability is kept at a respectable ± 20mA for driving heavier loads.
Published: |