Datasheet4U Logo Datasheet4U.com

LMV431 - Low-Voltage (1.24V) Adjustable Precision Shunt Regulators

This page provides the datasheet information for the LMV431, a member of the LMV Low-Voltage (1.24V) Adjustable Precision Shunt Regulators family.

Description

The LMV431, LMV431A and LMV431B are precision 1.24V shunt regulators capable of adjustment to 30V.

Negative feedback from the cathode to the adjust pin controls the cathode voltage, much like a non-inverting op amp configuration (Refer to Symbol and Functional diagrams).

Features

  • n Low Voltage Operation/Wide Adjust Range (1.24V/30V) n 0.5% Initial Tolerance (LMV431B) n Temperature Compensated for Industrial Temperature Range (39 PPM/˚C for the LMV431AI) n Low Operation Current (55µA) n Low Output Impedance (0.25Ω) n Fast Turn-On Response n Low Cost.

📥 Download Datasheet

Datasheet preview – LMV431

📁 Similar Datasheet

  • LMV431 - LMV431l LMV431Al LMV431B Low-Voltage (1.24V) Adj Precision Shunt Regs (Rev. G) (ETCTI)
  • LMV431A - LMV431l LMV431Al LMV431B Low-Voltage (1.24V) Adj Precision Shunt Regs (Rev. G) (ETCTI)
  • LMV431B - LMV431l LMV431Al LMV431B Low-Voltage (1.24V) Adj Precision Shunt Regs (Rev. G) (ETCTI)
  • LMV1012 - LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) (ETCTI)
  • LMV1015 - LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) (ETCTI)
  • LMV1024 - PDM Output with Pre-Amplifier (Texas Instruments)
  • LMV1026 - PDM Output with Pre-Amplifier (Texas Instruments)
  • LMV1031 - LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) (ETCTI)
  • LMV1032 - LMV1032-06/LMV1032-15/LMV1032-25 Amps for 3-Wire Analog Electret Microphones (Rev. G) (ETCTI)
  • LMV1088 - Dual Input Far Field Noise Suppression Microphone Amp w/Auto Cal (Rev. J) (ETCTI)
Other Datasheets by National Semiconductor
  • LMV431A - Low-Voltage (1.24V) Adjustable Precision Shunt Regulators
  • LMV431B - Low-Voltage (1.24V) Adjustable Precision Shunt Regulators
  • LMV422 - Dual Rail-to-Rail Output Operational Amplifier
  • LMV101 - Fixed-Gain Amplifiers
  • LMV1012 - Pre-Amplified ICs for High Gain 2-Wire Microphones
  • LMV1015 - Built-in Gain IC
  • LMV102 - Fixed-Gain Amplifiers
  • LMV1022 - PDM Output Pre-Amplifier

Full PDF Text Transcription

Click to expand full text
LMV431/LMV431A/LMV431B Low-Voltage (1.24V) Adjustable Precision Shunt Regulators August 2003 LMV431/LMV431A/LMV431B Low-Voltage (1.24V) Adjustable Precision Shunt Regulators General Description The LMV431, LMV431A and LMV431B are precision 1.24V shunt regulators capable of adjustment to 30V. Negative feedback from the cathode to the adjust pin controls the cathode voltage, much like a non-inverting op amp configuration (Refer to Symbol and Functional diagrams). A two resistor voltage divider terminated at the adjust pin controls the gain of a 1.24V band-gap reference. Shorting the cathode to the adjust pin (voltage follower) provides a cathode voltage of a 1.24V. The LMV431, LMV431A and LMV431B have respective initial tolerances of 1.5%, 1% and 0.
Published: |