LMV551 Datasheet PDF - National Semiconductor (LMV551 / LMV552) Micropower RRO Amplifier Specs

LMV551 - (LMV551 / LMV552) Micropower RRO Amplifier

Datasheet Summary

Description

The LMV551/LMV552 are high performance, low power operational amplifiers implemented with National’s advanced VIP50 process.

They feature 3 MHz of bandwidth while consuming only 34 μA of current per amplifier, which is an exceptional bandwidth to power ratio in this op amp class.

Features

(Typical 5V supply, unless otherwise noted).
Guaranteed 3V and 5.0V performance 3 MHz.
High unity gain bandwidth 37 µA.
Supply current (per amplifier) 93 dB.
CMRR 90 dB.
PSRR 1 V/µs.
Slew rate 70 mV from rail.
Output swing with 100 kΩ load 0.003% @ 1 kHz, 2 kΩ.
Total harmonic distortion.
40°C to 125°C.
Temperature range.

Datasheet Details

Part number	LMV551
Manufacturer	National Semiconductor
File Size	409.76 KB
Description	(LMV551 / LMV552) Micropower RRO Amplifier
Datasheet	LMV551 Datasheet
Additional preview pages of the LMV551 datasheet.

📁 Similar Datasheet

LMV551 - LMV551/LMV552/LMV554 3 MHz Micropower RRO Amplifiers (Rev. G) (ETCTI)

LMV552 - LMV551/LMV552/LMV554 3 MHz Micropower RRO Amplifiers (Rev. G) (ETCTI)

LMV1012 - LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) (ETCTI)

LMV1015 - LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) (ETCTI)

LMV1024 - PDM Output with Pre-Amplifier (Texas Instruments)

LMV1026 - PDM Output with Pre-Amplifier (Texas Instruments)

LMV1031 - LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) (ETCTI)

LMV1032 - LMV1032-06/LMV1032-15/LMV1032-25 Amps for 3-Wire Analog Electret Microphones (Rev. G) (ETCTI)

LMV1088 - Dual Input Far Field Noise Suppression Microphone Amp w/Auto Cal (Rev. J) (ETCTI)

LMV1089 - Dual Input Far Field Noise Suppression Microphone Amp w/ Auto Calibration (Rev. H) (ETCTI)

Full PDF Text Transcription

Click to expand full text

LMV551/LMV552 3 MHz, Micropower RRO Amplifier February 2007 LMV551/LMV552 3 MHz, Micropower RRO Amplifier General Description The LMV551/LMV552 are high performance, low power operational amplifiers implemented with National’s advanced VIP50 process. They feature 3 MHz of bandwidth while consuming only 34 μA of current per amplifier, which is an exceptional bandwidth to power ratio in this op amp class. These amplifiers are unity gain stable and provide an excellent solution for low power applications requiring a wide bandwidth. The LMV551/LMV552 have a rail-to-rail output stage and an input common mode range that extends below ground. The LMV551/LMV552 have an operating supply voltage range from 2.7V to 5.5V.

Published: Jun 27, 2007 |