Datasheet4U Logo Datasheet4U.com

LMV716 - Dual Operational Amplifier

General Description

The LMV716 is a dual operational amplifier with both low supply voltage and low supply current, making it ideal for portable applications.

Key Features

  • (Typical values, V+ = 3.3V, TA = 25˚C, unless otherwise specified) n Input noise voltage 12.8 nV/ n Input bias current 0.6 pA n Offset voltage 1.6 mV n CMRR 80 dB n Open loop gain 122 dB n Rail-to-rail output n GBW 5 MHz n Slew rate 5.8 V/µs n Supply current 1.6 mA n Supply voltage range 2.7V to 5V n Operating temperature.
  • 40˚C to 85˚C n 8-pin MSOP package.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMV716 Dual Operational Amplifier Texas Instruments
LMV710 SINGLE LOW-POWER RRIO OPERATIONAL AMPLIFIERS Texas Instruments
LMV710-N RRIO Operational Amplifiers Texas Instruments
LMV711 SINGLE LOW-POWER RRIO OPERATIONAL AMPLIFIERS Texas Instruments
LMV711-N RRIO Operational Amplifiers Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LMV710 Low Power / RRIO Operational Amplifiers
LMV711 Low Power / RRIO Operational Amplifiers
LMV712 RRIO Dual Operational Amplifier
LMV715 Low Power / RRIO Operational Amplifiers
LMV721 10MHz / Low Noise / Low Voltage / and Low Power Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com LMV716 5 MHz, Low Noise, RRO, Dual Operational Amplifier with CMOS Input September 2006 LMV716 5 MHz, Low Noise, RRO, Dual Operational Amplifier with CMOS Input General Description The LMV716 is a dual operational amplifier with both low supply voltage and low supply current, making it ideal for portable applications. The LMV716 CMOS input stage drives the IBIAS current down to 0.6 pA; this coupled with the low makes the LMV716 perfect noise voltage of 12.8 nV/ for applications requiring active filters, transimpedance amplifiers, and HDD vibration cancellation circuitry. Along with great noise sensitivity, small signal applications will benefit from the large gain bandwidth of 5 MHz coupled with the minimal supply current of 1.6 mA and a slew rate of 5.8 V/µs.