Datasheet4U Logo Datasheet4U.com

LP8545 - High-Efficiency LED Backlight Driver

General Description

The LP8545 is a white LED driver with integrated boost converter.

It has six adjustable current sinks which can be controlled by PWM input or with I2C-compatible serial interface.

The boost converter has adaptive output voltage control based on the LED driver voltages.

Key Features

  • which make it possible to detect LED outputs with open or short fault. As well low input voltage and boost over-current conditions are monitored and chip is turned off in case of these events. Thermal de-rating function prevents overheating of the device by reducing backlight brightness when set temperature has been reached. LP8545 is available in National's LLP 24-pin package. Features.
  • High-voltage DC/DC boost converter with integrated FET.
  • with four switching frequency.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LP8545 High-Efficiency LED Backlight Driver Texas Instruments
LP85454 10Base-T Isolation Transformers Link-PP
LP8543 SMBus/I2C Controlled WLED Driver Texas Instruments
LP85433 10Base-T Isolation Transformers Link-PP
LP8501 Multi-Purpose 9-Output LED Driver Texas Instruments

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LP8340 Low Dropout/ Low IQ/ 1.0A CMOS Linear Regulator
LP8345 Low Dropout/ Low IQ/ 500mA CMOS Linear Regulator
LP8358 150mA/ UCap/ Low Dropout Voltage Regulator
LP8720 One Step-Down DC/DC and Five Linear Regulators
LP8725 Power Management

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr LP8545 High-Efficiency LED Backlight Driver for Notebooks September 23, 2011 LP8545 High-Efficiency LED Backlight Driver for Notebooks General Description The LP8545 is a white LED driver with integrated boost converter. It has six adjustable current sinks which can be controlled by PWM input or with I2C-compatible serial interface. The boost converter has adaptive output voltage control based on the LED driver voltages. This feature minimizes the power consumption by adjusting the voltage to lowest sufficient level in all conditions. LED outputs have 8-bit current resolution and up to 13-bit PWM resolution with additional 1-3 bit dithering to achieve smooth and precise brightness control.