LPV321 Datasheet | National Semiconductor

Description The LPV321/358/324 are low power (9 µA per channel at 5.0V) versions of the LMV321/358/324 op amps. This is another addition to the LMV321/358/324 family of modity op amps. The LPV321/358/324 are the most cost effective solutions for the applications where low voltage, low power operation, space saving and low price are needed. The LPV321/358/ 324 have rail-to-rail output swing capability and the input mon-mode voltage range includes ground. They all exhibit excellent speed-power ratio, achieving 5 k Hz of bandwidth with a supply current of only 9 µA. The LPV321 is available in space saving 5-Pin SC70, which is approximately half the size of 5-Pin SOT23. The small package saves space on PC boards, and enables the design of small portable electronic devices. It also allows the designer to place the device closer to the signal source to reduce noise pickup and increase signal integrity. The chips are built with National’s advanced submicron silicon-gate Bi CMOS process. The LPV321/358/324 have bipolar input and output stages for improved noise performance and higher output current drive. Features (For V+ = 5V and V- = 0V, typical unless otherwise noted) j Guaranteed 2.7V and 5V performance j No crossover distortion j Space saving package 5-Pin SC70 2.0x2.1x1.0 mm j Industrial temperature range - 40˚C to +85˚C j Gain-bandwidth product 152 k Hz j Low supply current 9 µA LPV358 15 µA LPV324 28 µA j Rail-to-rail output swing @ 100 kΩ Load V+- 3.5 m V V- +90 m V j VCM - 0.2V to V+- 0.8V Applications n Active filters n General purpose low voltage applications n General purpose portable devices Connection Diagrams 5-Pin SC70/SOT23 8-Pin SOIC/MSOP 14-Pin SOIC/TSSOP Top View Top View Top View © 2006 National Semiconductor Corporation DS100920 .national. LPV321 Single/LPV358 Dual/LPV324 Quad Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National...