National Semiconductor TP3402
the TP3402 includes an oscillator circuit requiring an external crystal The TP3403 includes the functions of both the TP3401 and the TP3402 Features Complete ISDN PBX 2-Wire Data Transceiver including Y 2 B plus D channel interface for PBX U Interface Y 144 kb s full-duplex on 1 twisted pair using Burst Mode Y Loop range up to 6 kft ( 24AWG) Y Alternate Mark Inversion coding with transmit filter and scrambler for low emi radiation Y Adaptive line equalizer Y On-chip timing recovery no external components Y Standard TDM interface for B channels Y Separate interface for D channel Y 2 048 MHz...| Part No. | TP3402 |
|---|---|
| Datasheet | TP3402 Download |
| Manufacturer |  National Semiconductor |
| Description | DASL Digital Adapter |
| Buy | Stock & Price |
GENERAL DESCRIPTION
The TP3401 TP3402 and TP3403 are complete monolithic transceivers for data transmission on twisted pair subscriber loops They are built on National’s double poly microCMOS process and require only a single a 5 Volt supply Alternate Mark Inversion (AMI) line coding in which binary ‘1’s are alternately transmitted as a positive pulse then a negative pulse is used to ensure low error rates in the presence of noise with lower emi radiation than other codes such as Biphase (Manchester) Full-duplex transmission at 144 kb s is achieved on a single twisted wire pair using a burst-mode technique (Time Compression Multiplexed) Thus the device operates as an ISDN ‘U’ Interface for short loop applications typically in a PBX environment providing transmission for 2 B channels and 1 D channel On 24 cable the range is at least 1 8 km (6k ft) System timing is based on a Master Slave configuration with the line card end being the Master which controls loop timing and synchronisation...
