ADC08060 Datasheet | National Semiconductor

Description The ADC08060 is a low-power, 8-bit, monolithic analog-todigital converter with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates of 20 MSPS to 70 MSPS with outstanding dynamic performance over its full operating range while consuming just 1.3 m W per MHz of clock frequency. That’s just 78 m W of power at 60 MSPS. Raising the PD pin puts the ADC08060 into a Power Down mode where it consumes just 1 m W. The unique architecture achieves 7.5 Effective Bits with 25 MHz input frequency. The excellent DC and AC characteristics of this device, together with its low power consumption and single +3V supply operation, make it ideally suited for many imaging and munications applications, including use in portable equipment. Furthermore, the ADC08060 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08060’s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS patible with a separate output power supply pin to support interfacing with 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS patible. The ADC08060 is offered in a 24-lead plastic package (TSSOP) and is specified over the industrial temperature range of - 40˚C to +85˚C. Features n n n n n Single-ended input Internal sample-and-hold function Low voltage (single +3V) operation Small package Power-down feature Key Specifications n n n n n n n n n Resolution 8 bits Maximum sampling frequency 60 MSPS (min) DNL 0.4 LSB (typ) ENOB 7.5 bits (typ) at f IN = 25 MHz THD - 60 d B (typ) No missing codes Guaranteed Power Consumption Operating 1.3 m W/MSPS (typ) Power down 1 m W (typ) Applications n n n n n Digital imaging systems munication systems Portable instrumentation Viterbi decoders Set-top boxes Pin Configuration © 2003 National Semiconductor Corporation DS200062 .national. Orderin...