COP988FH Datasheet | National Semiconductor

Description The COP888FH Family of ROM based microcontrollers are highly integrated COP8™ Feature core devices with 12k memory and advanced features including Analog parators, and Hardware Multiply/Divide. These single-chip CMOS devices are suited for more plex applications requiring a full featured controller, low EMI, two parators, a full-duplex USART, and hardware multiply/divide functions. COP87L88FH devices are pin and software patible (different VCC range) 16k OTP (One Time Programmable) versions for pre-production , and for use with a range of COP8 software and hardware development tools. Device COP684FH COP884FH COP984FH COP688FH COP888FH COP988FH Memory (bytes) RAM (bytes) I/O Pins 12k ROM 12k ROM 12k ROM 12k ROM 12k ROM 12k ROM 512 512 512 512 512 512 24 24 24 36/40 36/40 36/40 Family features include an 8-bit memory mapped architecture, 10 MHz CKI with 1µs instruction cycle, hardware multiply/divide functions, three multi-function 16-bit timer/ counters with PWM, full duplex USART, MICROWIRE/ PLUS™, two Analog parators, two power saving HALT/ IDLE modes, MIWU, idle timer, high current outputs, software selectable options WATCHDOG™ and clock/ oscillator mode, low EMI 2.5V to 5.5V operation, and 28/ 40/44 pin packages. Devices included in this data sheet are: Packages 28 DIP/SOIC 28 DIP/SOIC 28 DIP/SOIC Temperature -40 to +85˚C 0 to +70˚C ments -55 to +125˚C 4.5V to 5.5V 2.5V to 4.0V, FHH=4.0V to 6.0V 40 DIP, 44 PLCC -55 to +125˚C 4.5V to 5.5V 40 DIP, 44 PLCC -40 to +85˚C 40 DIP, 44 PLCC 0 to +70˚C 2.5V to 4.0V, FHH=4.0V to 6.0V Key Features n Hardware Multiply/Divide Functions n Full duplex USART n Three 16-bit timers, each with two 16-bit registers supporting: - Processor Independent PWM mode - External Event counter mode - Input Capture mode n Quiet design (low radiated emissions) n 12 kbytes on-board ROM n 512 bytes on-board RAM I/O Features n Software selectable I/O options ( TRI-STATE ® , Push-Pull, Weak Pull-Up, and High Impedance Input) n...