DAC0800 Datasheet | National Semiconductor

Description The DAC0800 series are monolithic 8-bit high-speed current-output digital-to-analog converters (DAC) featuring typical settling times of 100 ns. When used as a multiplying DAC, monotonic performance over a 40 to 1 reference current range is possible. The DAC0800 series also features high pliance plementary current outputs to allow differential output voltages of 20 Vp-p with simple resistor loads as shown in Figure 1. The reference-to-full-scale current matching of better than ± 1 LSB eliminates the need for full-scale trims in most applications while the nonlinearities of better than ± 0.1% over temperature minimizes system error accumulations. The noise immune inputs of the DAC0800 series will accept TTL levels with the logic threshold pin, VLC, grounded. Changing the VLC potential will allow direct interface to other logic families. The performance and characteristics of the device are essentially unchanged over the full ± 4.5V to ± 18V power supply range; power dissipation is only 33 m W with ± 5V supplies and is independent of the logic input states. The DAC0800, DAC0802, DAC0800C and DAC0802C are a direct replacement for the DAC-08, DAC-08A, DAC-08C, and DAC-08H, respectively. Features n n n n n n n n n n n Fast settling output current: 100 ns Full scale error: ± 1 LSB Nonlinearity over temperature: ± 0.1% Full scale current drift: ± 10 ppm/˚C High output pliance: - 10V to +18V plementary current outputs Interface directly with TTL, CMOS, PMOS and others 2 quadrant wide range multiplying capability Wide power supply range: ± 4.5V to ± 18V Low power consumption: 33 m W at ± 5V Low cost Typical Applications DS005686-1 FIGURE 1. ± 20 VP-P Output Digital-to-Analog Converter (Note 5) Ordering Information Non-Linearity Temperature Range 0˚C ≤ TA ≤ +70˚C - 55˚C ≤ TA ≤ +125˚C 0˚C ≤ TA ≤ +70˚C DAC0802LCJ DAC0800LJ DAC0800LCJ Order Numbers J Package (J16A) (Note 1) N Package (N16E) (Note 1) SO Package (M16A) DAC-08HQ DAC0802LCN DAC-08Q DAC-08EQ DAC0800LCN...