DP83848H Datasheet | National Semiconductor

Description The DP83848H PHYTER® Mini Extreme addresses the high quality, high reliability and small form factor required for rugged operation in space sensitive and thermally demanding environments. This device is ideally suited for industrial and motor control, building/factory automation, automotive and test equipment applications. The DP83848H is designed from ground up for extreme temperature performance, with a thermally efficient package ensuring reliable operation over an operating range of -40C to 125C. Rigorously tested at both low temperature and high temperature extremes, the device is ideal for outdoor environments and demanding factory floor conditions. The device offers performance beyond the IEEE specifications, with superior interoperability and industry leading performance. The DP83848H offers Auto-MDIX to remove cabling plications, superior ESD protection of greater than 4KV HBM for greater reliability, and superior cable length operation (greater than 137m) to provide a high level of performance in all applications. ® Features - - - - - - - - - Low-power 3.3V, 0.18µm CMOS technology 3.3V MAC Interface Auto-MDIX for 10/100 Mb/s Energy Detection Mode MII Interface and MII serial management interface (MDC and MDIO) IEEE 802.3u Auto-Negotiation and Parallel Detection IEEE 802.3u ENDEC, 10BASE-T transceivers and filters IEEE 802.3u PCS, 100BASE-TX transceivers and filters Integrated ANSI X3.263 pliant TP-PMD physical sublayer with adaptive equalization and Baseline Wander pensation - Error-free Operation up to 137 meters - ESD protection - 4KV Human body model - LED support for Link - Supports system clock from oscillator - Single register access for plete PHY status A number of system cost-reducing features have been integrated that are not monly found in other Ethernet - 10/100 Mb/s packet BIST (Built in Self Test) Physical layer products (PHYs). For example, the - 40 pin LLP package (6mm) x (6mm) x (0.8mm) DP83848H offers a 25MHz clock out...