DS34C87T Datasheet | National Semiconductor

Description The DS34C87T is a quad differential line driver designed for digital data transmission over balanced lines. The DS34C87T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of CMOS. This enables the construction of serial and terminal interfaces while maintaining minimal power consumption. The DS34C87T accepts TTL or CMOS input levels and translates these to RS-422 output levels. This part uses special output circuitry that enables the individual drivers to power down without loading down the bus. This device has separate enable circuitry for each pair of the four drivers. The DS34C87T is pin patible to the DS3487T. All inputs are protected against damage due to electrostatic discharge by diodes to VCC and ground. Features n n n n n n n n n TTL input patible Typical propagation delays: 6 ns Typical output skew: 0.5 ns Outputs won’t load line when VCC = 0V Meets the requirements of EIA standard RS-422 Operation from single 5V supply TRI-STATE outputs for connection to system buses Low quiescent current Available in surface mount Connection and Logic Diagrams Dual-In-Line Package DS008576-2 Truth Table Input H L DS008576-1 Control Input H H L Non-Inverting Output H L Z Inverting Output L H Z Top View Order Number DS34C87TM or DS34C87TN See NS Package Number M16A or N16E L = Low logic state H = High logic state X = Irrelevant Z = TRI-STATE (high performance) TRI-STATE ® is a registered trademark of National Semiconductor Corporation. © 1998 National Semiconductor Corporation DS008576 .national. Absolute Maximum Ratings (Notes 1, 2) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Voltage (VIN) - 0.5 to 7.0V - 1.5 to VCC +1.5V - 0.5 to 7V ± 20 m A Plastic “N” Package 1736 m W SOIC Package 1226 m W Lead Temperature (TL) (Soldering 4 sec) 260˚C This device does not meet...