DS36C200 Datasheet | National Semiconductor

Description The DS36C200 is a dual transceiver device optimized for high data rate and low power applications. This device provides a single chip solution for a dual high speed bi-directional interface. Also, both control pins may be routed together for single bit control of datastreams. Both control pins are adjacent to each other for ease of routing them together. The DS36C200 is patible with IEEE 1394 physical layer and may be used as an economical solution with some considerations. Please reference the application information on 1394 for more information. The device is in a 14-lead small outline package. The differential driver outputs provides low EMI with its low output swings typically 210 m V. The receiver offers ± 100 m V threshold sensitivity, in addition to mon-mode noise protection. Features n n n n n n n n n Optimized for DSS to DVHS interface link patible IEEE 1394 signaling voltage levels Operates above 100 Mbps Bi-directional transceivers 14-lead SOIC package Ultra low power dissipation ± 100 m V receiver sensitivity Low differential output swing typical 210 m V High impedance during power off Connection Diagram Functional Diagram DS012621-1 Note: - denotes active LOW pin Order Number DS36C200M See NS Package Number M14A DS012621-2 TRI-STATE ® is a registered trademark of National Semiconductor Corporation. © 1998 National Semiconductor Corporation DS012621 .national. Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) - 0.3V to +6V Enable Input Voltage - 0.3V to (VCC + 0.3V) (DE, RE- ) Voltage (DI/RO) - 0.3V to +5.9V - 0.3V to +5.9V Voltage (DO/RI ± ) Maximum Package Power Dissipation @+25˚C M Package 1255 m W Derate M Package 10.04 m W/˚C above +25˚C Storage Temperature Range - 65˚C to +150˚C Lead Temperature Range (Soldering, 4 sec.) ESD Rating (Note 4) (HBM, 1.5 kΩ, 100 p F) (EIAJ, 0...