LF13202 Datasheet | National Semiconductor

Description These devices are a monolithic bination of bipolar and JFET technology producing the industry’s first one chip quad JFET switch. A unique circuit technique is employed to maintain a constant resistance over the analog voltage range of ± 10V. The input is designed to operate from minimum TTL levels, and switch operation also ensures a break-before-make action. These devices operate from ± 15V supplies and swing a ± 10V analog signal. The JFET switches are designed for applications where a dc to medium frequency analog signal needs to be controlled. Features n Analog signals are not loaded n Constant “ON” resistance for signals up to ± 10V and 100 k Hz n Pin patible with CMOS switches with the advantage of blow out free handling n Small signal analog signals to 50 MHz n Break-before-make action: t OFF < t ON n High open switch isolation at 1.0 MHz: - 50 d B n Low leakage in “OFF” state: < 1.0 n A n TTL, DTL, RTL patibility n Single disable pin opens all switches in package on LF11331, LF11332, LF11333 n LF11201 is pin patible with DG201 Test Circuit and Schematic Diagram DS005667-2 FIGURE 1. Typical Circuit for One Switch DS005667-12 FIGURE 2. Schematic Diagram (Normally Open) © 1999 National Semiconductor Corporation DS005667 .national. Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. (Note 2) Supply Voltage (VCC- VEE) Reference Voltage Logic Input Voltage Analog Voltage Analog Current 36V VEE≤VR≤VCC VR- 4.0V≤VIN≤VR+6.0V VEE≤VA≤VCC+6V; VA≤VEE+36V |IA| < 20 m A Power Dissipation (Note 3) Molded DIP (N Suffix) Cavity DIP (D Suffix) Operating Temperature Range LF11201, 2 and LF11331, 2, 3 LF13201, 2 and LF13331, 2, 3 Storage Temperature Soldering Information N and D Package (10 sec.) SO Package: Vapor Phase (60 sec.) Infrared (15 sec.) 500 m W 900 m W - 55˚C to +125˚C 0˚C to +70˚C - 65˚C to +150˚C 300˚C 215˚C...