LM3590 Datasheet | National Semiconductor

Description The LM3590 is a White LED constant current driver capable of supplying up to 3 White LEDs connected in series with 20m A. This device operates over a wide 6V-12.6V input voltage range. The output can acodate LEDs with a bined forward voltage of up to 11.5V, from a 12V input supply. The LED drive current is programmed by using an external resistor on the ISET pin. LED brightness can be linearly varied up to the programmed LED current by applying a Pulse Width Modulated (PWM) signal to the EN pin of the device. The LED output current of the LM3590 is tightly controlled over temperature and voltage. LED Current matching is guaranteed due to the series configuration of the LEDs. The series topology also simplifies the connection between the White LEDs in the display module and the LM3590 since only one connection is required. The LM3590 typically draws only 50µA when operating in the no-load condition and draws less than 0.1µA when the device is shut down. The LM3590 is available in a small 5-pin SOT23 package. Features n Drives up to 3 stacked white LEDs n 6.0V-12.6V input voltage range n Up to 20m A LED output current n Excellent LED current matching guaranteed by series configuration n Single connection to the White LEDs in the display module n Tightly controlled programmable current source n Low shutdown current (0.1µA typ.) n PWM brightness control n Very small solution size n SOT23-5 package: 3mm x 3mm x 1.0mm (Lx Wx H) Applications n White LED Display Backlights n Keypad Backlights n General purpose constant current driver for high forward-voltage LEDs Typical Application Circuit © 2003 National Semiconductor Corporation DS200813 .national. Connection Diagram Ordering Information Order Number LM3590MF LM3590MFX Package Description SOT23-5 SOT23-5 Package Marking SABB- ¢Z¢1¢X SABB- ¢Z¢1¢X Supplied As Tape and Reel 250 Units, Tape and Reel 3000 Units, Tape and Reel Pin Description Pin # 1 2 3 4 5 Name...