LM3701 Datasheet | National Semiconductor

Description The LM3700/LM3701 series of microprocessor supervisory circuits provide the maximum flexibility for monitoring power supplies and battery controlled functions in systems without backup batteries. The LM3700/LM3701 series are available in a 9-bump micro SMD package. Built-in features include the following: Reset: Reset is asserted during power-up, power-down, and brownout conditions. RESET is guaranteed down to VCC of 1.0V. Low Line Output: This early power failure warning indicator goes low when the supply voltage drops to a value which is 2% higher than the reset threshold voltage. n n n n n n n No external ponents required RESET (LM3700) or RESET (LM3701) outputs Precision supply voltage monitor Factory programmable Reset Timeout Delay Available in micro SMD package for minimum footprint ± 0.5% Reset threshold accuracy at room temperature ± 2% Reset threshold accuracy over temperature extremes n Reset assertion down to 1V VCC (RESET option only) n 28 µA VCC supply current Applications n n n n Embedded Controllers and Processors Intelligent Instruments Automotive Systems Critical µP Power Monitoring Features n Standard Reset Threshold voltage: 3.08V n Custom Reset Threshold voltages: For other voltages between 2.2V and 5.0V in 10m V increments, contact National Semiconductor Corp. Typical Application © 2002 National Semiconductor Corporation DS200114 .national. LM3700/LM3701 Connection Diagram Top View (looking from the coating side) micro SMD 9 Bump Package BPA09 Pin Descriptions Bump No. B1 C1 Name VCC RESET Power Supply input. Reset Logic Output. Pulses low for t RP (Reset Timeout Period) when triggered, and stays low whenever VCC is below the reset threshold or when MR is below VMRT. It remains low for t RP after either VCC rises above the reset threshold, or after MR input rises above VMRT (LM3700 only). Reset Logic Output. RESET is the inverse of RESET (LM3701 only). Low-Line Logic Output. Early Power-Fail warning...