LM3711 Datasheet | National Semiconductor

Description The LM3710/LM3711 series of microprocessor supervisory circuits provide the maximum flexibility for monitoring power supplies and battery controlled functions in systems without backup batteries. The LM3710/LM3711 series are available in MSOP-10 and 9-bump micro SMD packages. Built-in features include the following: Reset: Reset is asserted during power-up, power-down, and brownout conditions. RESET is guaranteed down to VCC of 1.0V. Manual Reset Input: An input that asserts reset when pulled low. Power-Fail Input: A 1.225V threshold detector for power fail warning, or to monitor a power supply other than VCC. Low Line Output: This early power failure warning indicator goes low when the supply voltage drops to a value which is 2% higher than the reset threshold voltage. Watchdog Timer: The WDI (Watchdog Input) monitors one of the µP’s output lines for activity. If no output transition occurs during the watchdog timeout period, reset is activated. Features n Standard Reset Threshold voltage: 3.08V n Custom Reset Threshold voltages: For other voltages between 2.2V and 5.0V in 10m V increments, contact National Semiconductor Corp. n No external ponents required n Manual-Reset input n RESET (LM3710) or RESET (LM3711) outputs n Precision supply voltage monitor n Factory programmable Reset and Watchdog Timeout Delays n Separate Power Fail parator n Available in micro SMD package for minimum footprint n ± 0.5% Reset threshold accuracy at room temperature n ± 2% Reset threshold accuracy over temperature extremes n Reset assertion down to 1V VCC (RESET option only) n 28 µA VCC supply current Applications n n n n Embedded Controllers and Processors Intelligent Instruments Automotive Systems Critical µP Power Monitoring Typical Application © 2002 National Semiconductor Corporation DS200118 .national. LM3710/LM3711 Connection Diagram Top View (looking from the coating side) micro SMD 9 Bump Package BPA09 MSOP-10 Pin...