LM4549A Datasheet | National Semiconductor

Description The LM4549A is an audio codec for PC systems which is fully PC99 pliant and performs the analog intensive functions of the AC ’97 Rev 2.1 architecture. Using 18-bit Sigma-Delta ADCs and DACs, the LM4549A provides 90 d B of Dynamic Range. The LM4549A was designed specifically to provide a high quality audio path and provide all analog functionality in a PC audio system. It features full duplex stereo ADCs and DACs and analog mixers with access to 4 stereo and 4 mono inputs. Each mixer input has separate gain, attenuation and mute control and the mixers drive 1 mono and 2 stereo outputs, each with attenuation and mute control. The LM4549A supports National’s 3D Sound stereo enhancement and a prehensive sample rate conversion capability. The sample rate for the ADCs and DACs can be programmed separately with a resolution of 1 Hz to convert any rate in the range 4 k Hz - 48 k Hz. Sample timing from the ADCs and sample request timing for the DACs are pletely deterministic to ease task scheduling and application software development. These features together with an extended temperature range also make the LM4549A suitable for non-PC codec applications. The LM4549A features the ability to connect several codecs together using the Extended AC Link configuration of one dedicated serial data signal to the Controller per codec. LM4549A systems support up to 8 simultaneous channels of streaming data on Input Frames (Codec to Controller) while Output Frames (Controller to Codec) carry 2 streams to multiple codecs. The LM4549A may also be used in systems with the National LM4550 to support up to 6 simultaneous channels of streaming data on Output Frames. The AC ’97 architecture separates the analog and digital functions of the PC audio system allowing both for system design flexibility and increased performance. Key Specifications n Analog Mixer Dynamic Range n DAC Dynamic Range n ADC Dynamic Range 97 d B (typ) 89 d B (typ) 90 d B (typ) Features n AC ’97 Rev 2.1 pliant...