LM49370 Datasheet | National Semiconductor

Description The LM49370 is an integrated audio subsystem that supports both analog and digital audio functions. The LM49370 includes a high quality stereo DAC, a mono ADC, a stereo headphone amplifier, which supports output cap-less (OCL) or AC-coupled (SE) modes of operation, a mono earpiece amplifier, and an ultra-low EMI spread spectrum Class D loudspeaker amplifier. It is designed for demanding applications in mobile phones and other portable devices. The LM49370 features a bi-directional I2S interface and a bidirectional PCM interface for full range audio on either interface. The LM49370 utilizes an I2C or SPI patible interface for control. The stereo DAC path features an SNR of 85 d B with an 18-bit 48 k Hz input. In SE mode the headphone amplifier delivers at least 33 m WRMS to a 32Ω single-ended stereo load with less than 1% distortion (THD+N) when A_VDD = 3.3V. The mono earpiece amplifier delivers at least 115m WRMS to a 32Ω bridged-tied load with less than 1% distortion (THD+N) when A_VDD = 3.3V. The mono speaker amplifier delivers up to 490m W into an 8Ω load with less than 1% distortion when LS_VDD = 3.3V and up to 1.2W when LS_VDD = 5.0V. The LM49370 employs advanced techniques to reduce power consumption, to reduce controller overhead, to speed development time, and to eliminate click and pop. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external ponents. It is therefore ideally suited for mobile phone and other low voltage applications where minimal power consumption, PCB area and cost are primary requirements. - - - - SNRLS (AUX IN to Loudspeaker) SNRDAC (Stereo DAC to AUXOUT) SNRADC (Mono ADC from Cell Phone In) SNRHP (Aux In to Headphones) 90 d B (typ) 85 d B (typ) 90 d B (typ) 98 d B (typ) 4.0 Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Spread Spectrum Class D architecture reduces EMI Mono Class D 8Ω amplifier, 490 m W at 3.3V OCL or AC-coupled...