LM5015 Datasheet | National Semiconductor

Description The LM5015 high voltage switch mode regulator features all the functions necessary to implement efficient high voltage Two-Switch Forward and Two-Switch Flyback regulators, using a minimum of external ponents. This easy to use regulator integrates high side and low side 75 Volt N-Channel MOSFETs with a minimum 1 Amp peak current limit. The voltage across the MOSFETs employed in the two-switch topology is clamped to the input voltage, allowing the input voltage range to approach the rating of the MOSFETs. The regulator control method is based on current mode control providing inherent ease of loop pensation and line feedforward for superior rejection of input transients. The operating frequency is set with a single resistor and is programmable up to 750 k Hz. The oscillator can also be synchronized to an external clock. Additional protection features include cycle-by-cycle current limiting, thermal shutdown, under-voltage lockout and remote shutdown capability. The device is available in the TSSOP-14EP package featuring an exposed die attach pad to enhance thermal dissipation. Features - - - - - - - - - - - - - - Dual Integrated 75V N-Channel MOSFETs Ultra-wide input voltage range: 4.25V to 75V Integrated high voltage bias regulator Adjustable output voltage 1.5% feedback reference accuracy Current mode control with selectable pensation Wide bandwidth error amplifier Integrated current sensing and limiting 50% maximum duty cycle limit Single resistor oscillator programming Oscillator synchronization capability Programmable soft-start Enable / Under-voltage Lockout (UVLO) pin Thermal shutdown Package - TSSOP-14EP (Exposed Pad) Typical Application Schematic © 2007 National Semiconductor Corporation .national. Connection Diagram Top View TSSOP-14 EP Package Ordering Information Order Number LM5015MH LM5015MHE LM5015MHX TSSOP-14 EP MXA14A Package Type NSC Package Drawing Supplied As 94 Units per Antistatic Tube 250...