LM6321 Datasheet | National Semiconductor

Description These high speed unity gain buffers slew at 800 V/µs and have a small signal bandwidth of 50 MHz while driving a 50Ω load. They can drive ± 300 m A peak and do not oscillate while driving large capacitive loads. The LM6121 family are monolithic ICs which offer performance similar to the LH0002 with the additional features of current limit and thermal shutdown. These buffers are built with National’s VIP™ (Vertically Integrated PNP) process which provides fast PNP transistors that are true plements to the already fast NPN devices. This advanced junction-isolated process delivers high speed performance without the need for plex and expensive dielectric isolation. Features n n n n n n n n n n High slew rate: 800 V/µs Wide bandwidth: 50 MHz Slew rate and bandwidth 100% tested Peak output current: ± 300 m A High input impedance: 5 MΩ LH0002H pin patible No oscillations with capacitive loads 5V to ± 15V operation guaranteed Current and thermal limiting Fully specified to drive 50Ω lines Applications n Line Driving n Radar n Sonar Simplified Schematic DS009223-1 Numbers in ( ) are for 8-pin N DIP. VIP™ is a trademark of National Semiconductor Corporation. © 1999 National Semiconductor Corporation DS009223 .national. Connection Diagrams Plastic DIP DS009223-2 - Heat-sinking pins. See Application section on heat sinking requirements. Order Number LM6221N, LM6321N or LM6121J/883 See NS Package Number J08A or N08E Metal Can DS009223-3 Note: Pin 6 connected to case. Top View Order Number LM6221H or LM6121H/883 See NS Package Number H08C Plastic SO DS009223-7 - Pin 3 must be connected to the negative supply. - - Heat-sinking pins. See Application section on heat-sinking requirements. These pins are at V- potential. Order Number LM6321M See NS Package Number M14A .national. Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and...