LM7332
LM7332 is High Output Operational Amplifier manufactured by National Semiconductor.
Description
The LM7332 is a dual rail-to-rail input and output amplifier with a wide operating temperature range (- 40°C to +125°C) which meets the needs of automotive, industrial and power supply applications. The LM7332 has the output current of 100 m A which is higher than that of most monolithic op amps. Circuit .. designs with high output current requirements often need to use discrete transistors because many op amps have low current output. The LM7332 has enough current output to drive many loads directly, saving the cost and space of the discrete transistors. The exceptionally wide operating supply voltage range of 2.5V to 32V alleviates any concerns over functionality under extreme conditions and offers flexibility of use in a multitude of applications. Most of this device's parameters are insensitive to power supply variations; this design enhancement is another step in simplifying usage. Greater than rail-to-rail input mon mode voltage range allows operation in many applications, including high side and low side sensing, without exceeding the input range. The LM7332 can drive unlimited capacitive loads without oscillations. The LM7332 is offered in the 8-pin MSOP and SOIC packages.
Features
(VS = ±15V, TA = 25°C, typical values unless specified.) 2.5V to 32V
- Wide supply voltage range 0.3V beyond rails
- Wide input mon mode voltage >100 m A
- Output short circuit current ±70 m A
- High output current (1V from rails) 21 MHz
- GBWP 15.2 V/µs
- Slew rate Unlimited
- Capacitive load tolerance 2.0 m A
- Total supply current
- 40°C to +125°C
- Temperature range
- Tested at
- 40°C, +125°C, and 25°C at 5V, ±5V, ±15V
Applications
- -
- -
- -
- -
MOSFET and power transistor driver Replaces discrete transistors in high current output circuits Instrumentation 4-20 m A current loops Analog data transmission Multiple voltage power supplies and battery chargers High and low side current sensing Bridge and sensor driving Digital to analog converter output
Key Graphs
Output...