LM9630 Datasheet | National Semiconductor

Description The LM9630 is a high performance, low power, CMOS Active Pixel Image Sensor capable of capturing monochrome images at 580 frames per second. In addition to the active pixel array, an on-chip 8 bit A/D convertor, fixed pattern noise elimination circuits a n d a video gain amplifier are provided. The integrated programmable timing and control circuit allows the user maximum flexibility in adjusting integration time and frame rate. Furthermore, a fast read out circuit is provided allowing a full frame to read out on a single 8-bit digital data bus in less than 2ms. The sensor utilizes a patented pixel design that incorporates an integrated electronic shutter. This together with its ultra high sensitivity makes the LM9630 an ideal choice for low light imaging applications or applications where images of fast moving objects need to be captured with minimum motion blur. Key Specifications Array Format Total Active Effective Image Area Total Active Optical Format Pixel Size Video Outputs Frame Rate Dynamic Range Electronic Shutter FPN 128H x 101V 118H x 96V 2.56 mm x 2.00 mm 2.36 mm x 1.92 mm 1/5” 20 µm x 20 µm 8 Bit Digital 580 frames per second 48 d B Global Reset 0.5% 1.3% 22 Volt/lux.s 47% 32 CLCC 3.3V +/- 10% 110 m W -40o C to 85 o C Applications f f f High Speed Motion Detection IR Imaging Low Light Imaging Applications PRMU Sensitivity Fill Factor Package Features f f f f f f f f f f f Electronic shutter with global reset & pixel exposure. Programmable analog video gain. Integrated 8 bit analog to digital conversion. Programmable integration time. Programmable frame rate. Master and slave mode of operation On chip black level pensation. Power down and low power modes. I2 C patible serial interface. 10 bit digital video port (8 data, vertical & horizontal sync). Power on reset with hardware and software override. Single Supply Power Consumption Operating Temp Chip Block Diagram mclk Row Decoder reset sda Clock Gen APS Array Offset Register Gain...