LM9704 Datasheet | National Semiconductor

Description The LM9704 contains all functions needed to build an SXGA or VGA digital still and video camera. It incorporates a 16 bit RISC microprocessor, a flexible image processing pipeline, hardware JPEG pression, and the required peripheral modules in a single IC. This architecture allows a very fast click-to-click time and full resolution video without sacrificing image quality or cost; because the putation extensive operations are processed by circuitry dedicated to image processing. The highly optimized memory management provided by the LM9704 keeps the memory cost of the plete camera to a minimum. A chip set prising of the LM9704 and a National SXGA or VGA CMOS image sensor plemented by a lens, battery, pact flash, power management for the battery, and LCD (optional) yields a plete high performance cost effective digital still and/or video camera. Applications ! ! ! ! ! ! PC Cameras Dual Mode Cameras Digital Still Cameras Clip-on Cameras for PDA’s, Cell Phones, etc. Embedded Cameras for PDA’s, Cell Phones, etc. Industrial Cameras Key Specifications Array Formats Input Color Format Digital Image Processor pression - Format - Ratio Video In Frame Rate Video Outputs - USART - USB External CR16C Memory - Memory Type - Address Space - Speed Serial Interfaces - ACCESS.bus - µ wire/SPI 16 bit RISC Processor - MIPS - Internal Memory Clock Speed Power Supply - Core - IO CIF, VGA, SXGA Bayer Pattern 10 bit (12 bit internal) Base Line JPEG Programmable up to 15MHz pixel clock up to 921.6K-bits per second 960K-byte/s SRAM, Flash, pact Flash, EEPROM up to 16 Mbyte up to 36MHz up to 400KHz up to 6.0 MHz up to 36 32K-bytes up to 60 Mhz from 12MHz Crystal 2.25 to 2.75 Volt 2.7 to 3.6 Volt Features Embedded 16 bit RISC processor system Up to 16M-bytes of external memory addressing space 32K-bytes Internal RAM 6 channel DMA 8 channel versatile timer Interrupt controller 16 input wake up module Full duplex USART µwire/SPI serial port 16 general purpose IOs (GPIO) !...