LMC555 Datasheet | National Semiconductor

Description The LMC555 is a CMOS version of the industry standard 555 series general purpose timers. In addition to the standard package (SOIC, MSOP, and MDIP) the LMC555 is also available in a chip sized package (8 Bump micro SMD) using National's micro SMD package technology. The LMC555 offers the same capability of generating accurate time delays and frequencies as the LM555 but with much lower power dissipation and supply current spikes. When operated as a one-shot, the time delay is precisely controlled by a single external resistor and capacitor. In the stable mode the oscillation frequency and duty cycle are accurately set by two external resistors and one capacitor. The use of National Semiconductor's LMCMOS™ process extends both the frequency range and low supply capability. Features - Less than 1 m W typical power dissipation at 5V supply - 3 MHz astable frequency capability - 1.5V supply operating voltage guaranteed - Output fully patible with TTL and CMOS logic at 5V supply - Tested to - 10 m A, +50 m A output current levels - Reduced supply current spikes during output transitions - Extremely low reset, trigger, and threshold currents - Excellent temperature stability - Pin-for-pin patible with 555 series of timers - Available in 8-pin MSOP Package and 8-Bump micro SMD package Pulse Width Modulator Ordering Information Package Temperature Range Package Marking Industrial - 40°C to +85°C 8-Pin Small Outline (SO) LMC555CM LMC555CMX LMC555CM 8-Pin Mini Small Outline (MSOP) LMC555CMM LMC555CMMX ZC5 8-Pin Molded Dip (MDIP) LMC555CN LMC555CN 8-Bump micro SMD NOPB LMC555CTP LMC555CTPX F02 Transport Media Rails 2.5k Units Tape and Reel 1k Units Tape and Reel 3.5k Units Tape and Reel Rails 250 Units Tape and Reel 3k Units Tape and Reel NSC Drawing M08A...