LMH0394 Datasheet | National Semiconductor

Description The LMH0394 3 Gbps HD/SD SDI Low Power Extended Reach Adaptive Cable Equalizer is designed to equalize data transmitted over cable (or any media with similar dispersive loss characteristics). The equalizer operates over a wide range of data rates from 125 Mbps to 2.97 Gbps and supports SMPTE 424M, SMPTE 292M, SMPTE 344M, SMPTE 259M, and DVB-ASI standards. The LMH0394 provides extended cable reach with ultra low power consumption. The equalizer includes active sensing circuitry that ensures robust performance and enhanced immunity to variations in the input signal launch amplitude. The output driver offers programmable de-emphasis for up to 40” of FR4 trace losses. The LMH0394 includes power management to further reduce power consumption when no input signal is present. The LMH0394 supports two modes of operation. In pin mode, the LMH0394 operates with control pins to set its operating state, and is footprint patible with the LMH0384, LMH0344, and legacy SDI equalizers. In SPI mode, an optional SPI serial interface can be used to access and configure multiple LMH0394 devices in a daisy-chain configuration. This allows programming the output mon mode voltage and swing, output de-emphasis level, input launch amplitude, and power management settings, as well as access to a cable length indicator and all pin mode features . Features - SMPTE 424M, SMPTE 292M, SMPTE 344M, SMPTE 259M, and DVB-ASI pliant - Equalizes up to 200 meters of Belden 1694A at 2.97 Gbps, - - - - - - - - - - - - - up to 220 meters of Belden 1694A at 1.485 Gbps, or up to 400 meters of Belden 1694A at 270 Mbps Ultra low power consumption: 115 m W (normal operation) Power save mode with auto sleep control (16 m W typical power consumption in power save mode) Output de-emphasis to pensate for FR4 board trace losses Digital and analog programmable MUTEREF threshold control Optional SPI register access Wide range of data rates: 125 Mbps to 2.97 Gbps Internally terminated 100Ω LVDS outputs with...