LMV721 Datasheet | National Semiconductor

Description The LMV721 (Single) and LMV722 (Dual) are low noise, low voltage, and low power op amps, that can be designed into a wide range of applications. The LMV721/LMV722 has a unity gain bandwidth of 10MHz, a slew rate of 5V/us, and a quiescent current of 930u A/amplifier at 2.2V. The LMV721/722 are designed to provide optimal performance in low voltage and low noise systems. They provide rail-to-rail output swing into heavy loads. The input mon-mode voltage range includes ground, and the maximum input offset voltage are 3.5m V (Over Temp.) for the LMV721/LMV722. Their capacitive load capability is also good at low supply voltages. The operating range is from 2.2V to 5.5V. The chip is built with National’s advanced Submicron Silicon-Gate Bi CMOS process. The single version, LMV721, is available in 5 pin SOT23-5 and a SC-70 (new) package. The dual version, LMV722, is available in a SO-8 and MSOP-8 package. Features (For Typical, 5 V Supply Values; Unless Otherwise Noted) n Guaranteed 2.2V and 5.0V Performance n Low Supply Current LMV721/2 930µA/amplifier @2.2V n High Unity-Gain Bandwidth 10MHz n Rail-to-Rail Output Swing @ 600Ω load 120m V from either rail at 2.2V @ 2kΩ load 50m V from either rail at 2.2V n Input mon Mode Voltage Range Includes Ground n Silicon Dust™, SC70-5 Package 2.0x2.0x1.0 mm @ f = 1KHz n Input Voltage Noise 9 Applications n n n n Cellular an Cordless Phones Active Filter and Buffers Laptops and PDAs Battery Powered Electronics Connection Diagrams 5-Pin SC-70/SOT23-5 8-Pin SO/MSOP DS100922-99 DS100922-63 Top View Top View Silicon Dust™ is a trademark of National Semiconductor Corporation. © 1999 National Semiconductor Corporation DS100922 .national. Ordering Information Temperature Range Package 8-Pin Small Outline Industrial - 40˚C to +85˚C LMV722M LMV722MX 8-pin MSOP LMV722MM LMV722MMX 5-Pin SOT23 LMV721M5 LMV721M5X 5-Pin SC-70 LMV721M7 LMV721M7X LMV722M LMV722M LMV722 LMV722 A30A A30A A20 A20 Rails 2.5K Units Tape and Reel 1K...