LP2980-ADJEP Datasheet | National Semiconductor

Description The LP2980-ADJEP is a 50 m A adjustable voltage regulator designed to provide ultra low dropout in battery powered applications. Using an optimized VIP® (vertically Integrated PNP) process, the LP2980-ADJEP delivers unequalled performance in all specifications critical to battery-powered designs: Adjustable Output: output voltage can be set from 1.23V to 15V. Precision Reference: 0.75% tolerance. Dropout Voltage: typically 120 m V @ 50 m A load, and 7 m V @ 1 m A load. Ground Pin Current: typically 320 µA @ 50 m A load, and 80 µA @ 1 m A load. Sleep Mode: less than 1 μA quiescent current when on/off pin is pulled low. Smallest Possible Size: SOT-23 package uses minimum board space. ENHANCED PLASTIC - Extended Temperature Performance of -40°C to +125°C - Baseline Control - Single Fab & Assembly Site - Process Change Notification (PCN) - Qualification & Reliability Data - Solder (Pb Sn) Lead Finish is standard - Enhanced Diminishing Manufacturing Sources (DMS) Support Features - - - - - - - - - - Ultra low dropout voltage Output adjusts from 1.23V to 15V Guaranteed 50 m A output current Uses tiny SOT-23 package Requires few external ponents <1 μA quiescent current when shutdown Low ground pin current at all loads High peak current capability (150 m A typical) Wide supply voltage range (2.5V- 16V) Overtemperature/overcurrent protection Applications - Selected Military Applications - Selected Avionics Applications Order Information PART NUMBER LP2980IM5-ADJEP (Notes 1, 2) VID PART NUMBER V62/07601-01XA TBD NS PACKAGE NUMBER (Note 3) MF05A TBD Note 1: For the following (Enhanced Plastic) version, check for availability: LP2980IM5XADJEP Note 2: FOR ADDITIONAL ORDERING AND PRODUCT INFORMATION, PLEASE VISIT THE ENHANCED PLASTIC WEB SITE AT: .national./ mil Note 3: Refer to package details under Physical Dimensions VIP® is a registered trademark of National Semiconductor Corporation. © 2007 National Semiconductor Corporation .national. .Data Sheet.in LP2980-...