SM72480 Datasheet | National Semiconductor

Description The SM72480 is a low-voltage, precision, dual-output, lowpower temperature switch and temperature sensor. The temperature trip point (TTRIP) is set at the factory to be 120°C. Built-in temperature hysteresis (THYST) keeps the output stable in an environment of temperature instability. In normal operation the SM72480 temperature switch outputs assert when the die temperature exceeds TTRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (TTRIP - THYST). The OVERTEMP digital output, is active-high with a push-pull structure, while the OVERTEMP digital output, is active-low with an open-drain structure. The analog output, VTEMP, delivers an analog output voltage with Negative Temperature Coefficient - NTC. Driving the TRIP TEST input high: (1) causes the digital outputs to be asserted for in-situ verification and, (2) causes the threshold voltage to appear at the VTEMP output pin, which could be used to verify the temperature trip point. The SM72480's low minimum supply voltage makes it ideal for 1.8 volt system designs. Its wide operating range, low supply current , and excellent accuracy provide a temperature switch solution for a wide range of mercial and industrial applications. Features - Renewable Energy Grade - Low 1.6V operation - Latching function: device can latch the Over Temperature - - - - - condition Push-pull and open-drain temperature switch outputs Very linear analog VTEMP temperature sensor output VTEMP output short-circuit protected 2.2 mm by 2.5 mm (typ) LLP-6 package Excellent power supply noise rejection Key Specifications - Supply Voltage - Supply Current - Accuracy, Trip Point Temperature 1.6V to 5.5V 8 μA (typ) 0°C to 150°C 0°C to 150°C ±2.2°C ±2.3°C ±100 μA - 50°C to 150°C 4.5°C to 5.5°C - Accuracy, VTEMP - VTEMP Output Drive - Operating Temperature - Hysteresis Temperature .Data Sheet.net/ Applications - - - - - PV Power Optimizers Wireless Transceivers Battery Management...