TP3070 Datasheet | National Semiconductor

Description The TP3070 and TP3071 are second-generation bined PCM CODEC and Filter devices optimized for digital switching applications on subscriber line and trunk cards. Using advanced switched capacitor techniques, BO II bines transmit bandpass and receive lowpass channel filters with a panding PCM encoder and decoder. The devices are A-law and µ-law selectable and employ a conventional serial PCM interface capable of being clocked up to 4.096 MHz. A number of programmable functions may be controlled via a serial control port. Channel gains are programmable over a 25.4 d B range in each direction, and a programmable filter is included to enable Hybrid Balancing to be adjusted to suit a wide range of loop impedance conditions. Both transformer and active SLIC interface circuits with real or plex termination impedances can be balanced by this filter, with cancellation in excess of 30 d B being readily achievable when measured across the passband against standard test termination networks. To enable BO II to interface to the SLIC control leads, a number of programmable latches are included; each may be configured as either an input or an output. The TP3070 provides 6 latches and the TP3071 5 latches. Features n plete CODEC and FILTER system including: - Transmit and receive PCM channel filters - µ-law or A-law panding encoder and decoder - Receive power amplifier drives 300Ω - 4.096 MHz serial PCM data (max) n Programmable Functions: - Transmit gain: 25.4 d B range, 0.1 d B steps - Receive gain: 25.4 d B range, 0.1 d B steps - Hybrid balance cancellation filter - Time-slot assignment; up to 64 slots/frame - 2 port assignment (TP3070) - 6 interface latches (TP3070) - A or µ-law - Analog loopback - Digital loopback n Direct interface to solid-state SLICs n Simplifies transformer SLIC; single winding secondary n Standard serial control interface n 80 m W operating power (typ) n 1.5 m W standby power (typ) n Designed for CCITT and LSSGR applications n TTL and CMOS patible...