Datasheet4U Logo Datasheet4U.com

SC-B1440 - LVCMOS

General Description

The SC-B1440 Series of quartz crystal oscillators provide enable/disable 3-state LVCMOS compatible signals for bus connected systems.

Supplying Pin 1 of the SC-B1440 units with a logic “1” or open enables its Pin 3 output.

In the disable mode, Pin 3 presents a high impedance to the load.

Key Features

  • Size, mm 5x7 I/O 4 pad Supply Voltage 3.3V / 2.5V / 5V.
  • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions.
  • Low jitter - Wavecrest jitter characterization available.
  • Wide frequency range.
  • 70.0 MHz to 220.0 MHz (Contact factory for other frequencies).
  • User specified tolerance available.
  • Will withstand vapor phase temperatures of 253°C for 4 minutes maximum.
  • Space-saving alternative to discrete compo.

📥 Download Datasheet

Datasheet Details

Part number SC-B1440
Manufacturer Nel Frequency Controls
File Size 237.61 KB
Description LVCMOS
Datasheet download datasheet SC-B1440 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SC-B1420 LVCMOS NEL
SC-01 Votrax CMOS Phoneme Speech Synthesizer Votrax
SC-050-x Common Mode Chokes Premo
SC-060-x Common Mode Chokes Premo
SC-0704-2R2M Inductor Shielded SMD Brightek

Other Datasheets by Nel Frequency Controls

Part Number Description
SC-A142x Crystal Clock Oscillators
SC-C1440 LVCMOS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com SC-B1440 Series LVCMOS SC-B1440 Series Rev J Frequency Range: 70.0 MHz to 220.0 MHz Description The SC-B1440 Series of quartz crystal oscillators provide enable/disable 3-state LVCMOS compatible signals for bus connected systems. Supplying Pin 1 of the SC-B1440 units with a logic “1” or open enables its Pin 3 output. In the disable mode, Pin 3 presents a high impedance to the load. Features Size, mm 5x7 I/O 4 pad Supply Voltage 3.3V / 2.5V / 5V • High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions • Low jitter - Wavecrest jitter characterization available • Wide frequency range—70.0 MHz to 220.