NeoFidelity NTP8910A
The NTP8910A is a single chip full digital audio amplifier including power stage for stereo amplifier system. NTP8910A is integrated with versatile digital audio signal processing functions, high-performance, highfidelity fully digital PWM modulator and two high-power full-bridge MOSFET power stages. The NTP8910A receives digital serial audio data with sampling frequencies of 32kHz, 44.1kHz, 48kHz, and 96kHz.| Part No. | NTP8910A |
|---|---|
| Datasheet | NTP8910A Download |
| Manufacturer |  NeoFidelity |
| Description | High Fidelity Power Driver Integrated Full Digital Audio Amplifier |
| Buy | Stock & Price |
GENERAL DESCRIPTION
It delivers 2 x 10 watts in stereo mode without heat sink. The NTP8910A has a mixer and Bi-Quad filters which can be used to implement the essential audio signal processing functions like loudness control, compensation of a loud speaker response and parametric equalization. All the functions of the NTP8910A can be controlled by internal register values via I2C host interface bus. PackageFEATURES
● 2 CH Stereo (10W x 2 BTL)● Wide Operating Supply Voltage Range (4.5V to 20V)
● SDATA Generator (I2S output)
● Floating Point Operation
● 32 Programmable Bi-Quad Filters Speaker Compensation LPF, HPF, DC Cut Advanced Parametric Equalizer
● IBB(Intelligent BASS Boost)
● 3 Band Dynamic Range Control
● RS(Reinforced Sound) DRC
● Loudness Control
● Protection Circuit OCP(Over Current Protection) OTP(Over Temperature Protection) UVP(Under Voltage Protection) BQ/DRC Checksum
● Vol/Soft Mute/Power Meter/NS Feedback
● Smart PWM Switch on/off
● High Efficiency
● DC p...
