Datasheet4U Logo Datasheet4U.com

NJG1707PG1 - 800MHz TDMA FRONT-END GaAs MMIC

General Description

NJG1707PG1 is a front-end IC for a digital cellular phone of 800MHz band.

A 2x6 antenna switches and a low noise amplifier are included.

The parallel control signals of three bits logic connect T/R circuits to internal two antennas or external two antennas.

Key Features

  • Ultra small & thin package.
  • Antenna Switch lLow voltage operation lLow current consumption lLow insertion loss lLow Adjacent Channel Leakage Power.
  • Low Noise Amplifier lLow voltage operation lLow current consumption lSmall signal gain lLow noise figure lHigh input IP3 n PIN.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJG1711KC1 LNA+Mixer / FLP10-C1 JRC
NJG1712KC1 LNA+Mixer / FLP10-C1 JRC
NJG1714KC1 LNA+Mixer / FLP10-C1 JRC
NJG1715KC1 LNA+Mixer / FLP10-C1 JRC
NJG1717KT2 PA+SPDT SW+LNA+Mixer / QFN24-T2 JRC

Other Datasheets by New Japan Radio

Part Number Description
NJG1701V PHS MULTI-FUNCTION GaAs MMIC
NJG1704 800MHz BAND FRONT-END GaAs MMIC
NJG1704KC1 800MHz BAND FRONT-END GaAs MMIC
NJG1704V 800MHz BAND FRONT-END GaAs MMIC
NJG1705V 1.5/1.9GHz BAND FRONT-END GaAs MMIC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJG1707PG1 800MHz TDMA FRONT-END GaAs MMIC n GENERAL DESCRIPTION NJG1707PG1 is a front-end IC for a digital cellular phone of 800MHz band. A 2x6 antenna switches and a low noise amplifier are included. The parallel control signals of three bits logic connect T/R circuits to internal two antennas or external two antennas. The termination ports with external matching circuits make low interference between diversity antennas. The ultra small & thin FFP32-G1 package is adopted.