Datasheet4U Logo Datasheet4U.com

NJU7011 - LOW-POWER TINY SINGLE C-MOS OPERATIONAL AMPLIFIER

General Description

amplifiers operated on a single-power-supply, low voltage and low operating current.

The input bias current is as low as than 1pA,consequently very small signal around the ground level can be amplified.

Key Features

  • S.
  • Single-Power-Supply.
  • Wide Operating Voltage.
  • Wide Output Swing Range.
  • Low Operating Current ( VDD=1~5.5V ) ( VOM=2.9V min. @ 3.0V ).
  • Low Bias Current ( IIB=1pA typ. ).
  • Internal Compensation Capacitor.
  • Package Outline SOT.
  • 23.
  • 5.
  • C-MOS Technology.
  • PIN.

📥 Download Datasheet

Datasheet Details

Part number NJU7011
Manufacturer New Japan Radio
File Size 278.50 KB
Description LOW-POWER TINY SINGLE C-MOS OPERATIONAL AMPLIFIER
Datasheet download datasheet NJU7011 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJU7007 LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS OPERATIONAL AMPLIFIER JRC
NJU7008 LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS OPERATIONAL AMPLIFIER JRC
NJU7009 Rail-to-Rail Output Single CMOS Operational Amplifier JRC
NJU7026 Rail-to-Rail Output CMOS Operational Amplifier NJR
NJU7044 Quad CMOS Operational Amplifier JRC

Other Datasheets by New Japan Radio

Part Number Description
NJU7012 LOW-POWER TINY SINGLE C-MOS OPERATIONAL AMPLIFIER
NJU7013 LOW-POWER TINY SINGLE C-MOS OPERATIONAL AMPLIFIER
NJU7014 LOW-POWER DUAL C-MOS OPERATIONAL AMPLIFIER
NJU7015 LOW-POWER DUAL C-MOS OPERATIONAL AMPLIFIER
NJU7016 LOW-POWER DUAL C-MOS OPERATIONAL AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJU7011/12/13 LOW-POWER TINY SINGLE C-MOS OPERATIONAL AMPLIFIER ■ GENERAL DESCRIPTION The NJU7011,12 and 13 are single C-MOS operational amplifiers operated on a single-power-supply, low voltage and low operating current. The input bias current is as low as than 1pA,consequently very small signal around the ground level can be amplified. The minimum operating voltage is 1V and the output stage permits output signal to swing between both of the supply rails. Furthermore, this series is packaged with very small SOT−23−5, therefore it can be especially applied to portable items. ■ PACKAGE OUTLINE NJU701XF ■ FEATURES ● Single-Power-Supply ● Wide Operating Voltage ● Wide Output Swing Range ● Low Operating Current ( VDD=1~5.5V ) ( VOM=2.9V min. @ 3.0V ) ● Low Bias Current ( IIB=1pA typ.