Datasheet4U Logo Datasheet4U.com

NJU7029 - Rail-to-Rail Output Dual CMOS Operational Amplifier

General Description

noise of VNI=13nV/√Hz (typ.

low operating voltage.

It offers a single supply voltage operation from +2.2V to +5.5V, rail-to-rail output swing in both supply rails and input voltage range from ground.

Key Features

  • Low Noise.
  • Voltage Noise 13nV/√Hz (typ. ) @f=1kHz 3µVrms (max. ) @f=100Hz~20kHz Easy to Use.
  • Gain Bandwidth 3MHz.
  • Slew Rate.
  • Isource / Isink 1V/µs (t.

📥 Download Datasheet

Datasheet Details

Part number NJU7029
Manufacturer New Japan Radio
File Size 616.99 KB
Description Rail-to-Rail Output Dual CMOS Operational Amplifier
Datasheet download datasheet NJU7029 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJU7026 Rail-to-Rail Output CMOS Operational Amplifier NJR
NJU7007 LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS OPERATIONAL AMPLIFIER JRC
NJU7008 LOW POWER AND LOW OFFSET VOLTAGE SUPER SMALL-SIZED SINGLE C-MOS OPERATIONAL AMPLIFIER JRC
NJU7009 Rail-to-Rail Output Single CMOS Operational Amplifier JRC
NJU7044 Quad CMOS Operational Amplifier JRC

Other Datasheets by New Japan Radio

Part Number Description
NJU7021 LOW VOLTAGE C-MOS OPERATIONAL AMPLIFIER
NJU7022 LOW VOLTAGE C-MOS OPERATIONAL AMPLIFIER
NJU7024 LOW VOLTAGE C-MOS OPERATIONAL AMPLIFIER
NJU7027 Rail-to-Rail Output CMOS Operational Amplifier
NJU7028 Rail-to-Rail Output CMOS Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJU7029 Low Noise, Rail-to-Rail Output Dual CMOS Operational Amplifier ■ GENERAL DESCRIPTION The NJU7029 is a dual CMOS operational amplifier with a low noise of VNI=13nV/√Hz (typ. @f=1kHz), Rail-to-Rail output and low operating voltage. It offers a single supply voltage operation from +2.2V to +5.5V, rail-to-rail output swing in both supply rails and input voltage range from ground. Further the NJU7029 has a low bias current of 1pA, which makes it well-suited for current sense amplifiers such as an acceleration sensor, shock sensor and photodiode amplifier. The NJU7029 is available in small surface mount packages of SSOP8, MSOP8 (TVSP8) and an ultra small lead-less package of ESON8 which allows high-density mounting.