New Japan Radio NJU7042
The NJU7042 is a tiny Rail-to-Rail Input/Output single CMOS operational amplifier The operating voltage is 2.7V to 5.5V and the input and output stage permits signal to swing between both of the supply rails. The input offset voltage is lower than 5mV, and the input bias current is as low as than 1pA, consequently very small signal around the ground level can be amplified. Furthermore, The NJU7042 is packaged with very small SOT−23−5, therefore it can be especially applied to portable applications.| Part No. | NJU7042 |
|---|---|
| Datasheet | NJU7042 Download |
| Manufacturer |  New Japan Radio |
| Description | Single CMOS Operational Amplifier |
| Buy | Stock & Price |
GENERAL DESCRIPTION
●PACKAGE INFORMATION NJU7042F●
FEATURES
●Rail-to-Rail Input VIN=VSS to VDD●Rail-to-Rail Output VOM2.7V min. @3V
●Low Input Offset Voltage VIO=5mV max.
●Single-Power-Supply VDD=2.7 to 5.5V
●Low Operating Current IDD=15uA typ.
●High Load Current IOH/IOL=200uA typ.
●Low Bias Current IIB=1pA typ.
●Compensation Capacitor Incorporated
●Package Outline SOT−23−5
●C-MOS Technology
●EQUIVALENT CIRCUIT VDD
●PIN CONFIGURATION (Top View) IN+ 1 5 VDD VSS 2 IN- 3 4 OUT IN - IN + OUT VSS 3/30/2016 ( 1 / 3 ) NJU7042
●
ABSOLUTE MAXIMUM RATINGS
(Ta=25C) PARAMETER SYMBOL RATING UNIT Supply Voltage Differential Input Voltage Common Mode Input Voltage Power Dissipation Operating Temperature VDD VID VIC PD Topr 7.0 7.0 (Note1) -0.3 to 7.0 200 -40 to +85 V V V mW C Storage Temperature Tstg -55 to +125 C Note1) If the supply voltage (VDD) is less than 7.0V, the input voltage must not over the VDD level though 7.0V is limit specified. Note2) Decoupling capacitor should be connected be...
