Datasheet4U Logo Datasheet4U.com

NJU7385 - Dual H-bridge Driver

General Description

versatility for a compact actuator.

types of control systems, “Two-input” and “Phase & Enable”.

Input part has a Schmitt inverter circuit with a high resistance to noise.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJU7380 STEPPER MOTOR CONTROLLER JRC
NJU7381 DUAL H-BRIDGE DRIVER JRC
NJU7382 Stepper Motor / FFP16-C1 JRC
NJU7329B Single-phase DC Brushless Motor Driver IC JRC
NJU7332 Single-phase DC Brushless Motor Driver IC JRC

Other Datasheets by New Japan Radio

Part Number Description
NJU7381A LOW VOLTAGE OPERATION DUAL H BRIDGE DRIVER
NJU7382A LOW VOLTAGE OPERATION DUAL H-BRIDGE DRIVER
NJU7384 Digital Signal Processor
NJU7301 C-MOS QUAD SPST ANALOG SWITCH
NJU7304 8-CHANNEL MULTIPLEXER WITH SAMPLE AND HOLD

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJU7385 Dual H-bridge Driver for actuator GENERAL DESCRIPTION The NJU7385 is a dual H-bridge driver IC that has general versatility for a compact actuator. The Mode Select Function in the control part can select two types of control systems, “Two-input” and “Phase & Enable”. Input part has a Schmitt inverter circuit with a high resistance to noise. And it has a transition sequence which automatically transits to standby mode with no input signal. Output part has two circuit configurations of independent H-bridge. Protection circuit contains an under voltage lockout (UVLO) circuit and a thermal shutdown circuit and outputs alarm signal if an error is detected. Supply /interface voltage corresponds to the logic, 3.3V/5.0V.