Datasheet4U Logo Datasheet4U.com

NJW1230 - 1ch Video Amplifier & 2Vrms Ground Referenced Stereo Line Amplifier

General Description

The NJW1230 is an audio line Amplifier with 1ch video amplifiier.

Audio line amplifier can swing 2Vrms (5.6V peak-to-peak) signal at 3.3V operating voltage.

Ground-referenced outputs eliminate output coupling capacitor.

Key Features

  • O Operating Voltage O Power Save circuit O Package Outline Audio block O Output Coupling Capacitor-less O Pop Noise Suppression Circuit Video block O LPF O 6dB Amplifier O 75Ω Driver (2-system drive) Q BLOCK.

📥 Download Datasheet

Datasheet Details

Part number NJW1230
Manufacturer New Japan Radio
File Size 228.16 KB
Description 1ch Video Amplifier & 2Vrms Ground Referenced Stereo Line Amplifier
Datasheet download datasheet NJW1230 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJW1280 High Capacitance Piezo-sounder Driver JRC
NJW1112 8-In 4-Out Stereo Audio Selector NJR Corporation
NJW1119A 3-Band Tone Control IC JRC
NJW1124 Voice Switched Speakerphone circuit NJR Corporation
NJW1128 Voice Switched Speakerphone Circuit NJR Corporation

Other Datasheets by New Japan Radio

Part Number Description
NJW1200 Low-Voltage 2-channel Electronic Volume
NJW1201A 2ch Electronic Volume
NJW1222 4.1-channel Electronic Volume
NJW1240 5Vrms Ground Referenced 6-Channel Line Amplifier
NJW1241 3-Chanels Differential Output Line Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet.co.kr NJW1230 1ch Video Amplifier & 2Vrms Ground Referenced Stereo Line Amplifier Q GENERAL DESCRIPTION The NJW1230 is an audio line Amplifier with 1ch video amplifiier. Audio line amplifier can swing 2Vrms (5.6V peak-to-peak) signal at 3.3V operating voltage. Ground-referenced outputs eliminate output coupling capacitor. The pop noise suppression circuit removes a pop noise at the power-on and power-off. Video amplifier contained LPF circuit. Internal 75Ω driver is easy to connect TV monitor directly.