Datasheet4U Logo Datasheet4U.com

NJW4830 - Single High Side Switch

General Description

The NJW4830 is the single high-side switch that can supply 0.5A.

The active clamp circuit, overcurrent and thermal shutdown are built-in with Pch MOS FET.

It can be controlled by a logic signal (3V/5V) directly.

Key Features

  • Drain-Source Voltage 45V Drain Current 0.5A Corresponding with Logic Voltage Operation: 3V/5V Low On-Resistance 0.35Ω (typ. ) Low Consumption Current 110µA (typ. ) Active Clamp Circuit Over Current Protection Thermal Shutdown Package Outline SOT89-5 PIN.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NJW4822 1-Channel Low Side Switch JRC
NJW4828-A Parallel Input 8-channel Sink Driver JRC
NJW4104 45V Ultra low Quiescent current LDO Nisshinbo
NJW4108 Lithium-ion Battery Charger Controller JRC
NJW4109 500mA LDO Nisshinbo

Other Datasheets by New Japan Radio

Part Number Description
NJW4832 1-channel High Side Switch
NJW4800 30V/4A Half Bridge Driver
NJW4801 Small PKG Half Bridge Driver
NJW4810 35V / 1A H-Bridge Driver
NJW4810A Dual Half Bridge Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NJW4830 Single High Side Switch GENERAL DESCRIPTION The NJW4830 is the single high-side switch that can supply 0.5A. The active clamp circuit, overcurrent and thermal shutdown are built-in with Pch MOS FET. It can be controlled by a logic signal (3V/5V) directly. Therefore, it is suitable for Car accessory, Industrial Equipments and other applications. „ PACKAGE OUTLINE NJW4830U2 FEATURES Drain-Source Voltage 45V Drain Current 0.5A Corresponding with Logic Voltage Operation: 3V/5V Low On-Resistance 0.35Ω (typ.) Low Consumption Current 110µA (typ.) Active Clamp Circuit Over Current Protection Thermal Shutdown Package Outline SOT89-5 PIN CONFIGURATION 524 1. IN 2. GND 3. FLT 4. VDD 5.